Product advantages: The flat elevator cable is the most widely demanded universal product in the market. This product has high quality, long service life and affordable price, and has been deeply trusted by customers.
Conductor type: The conductor is made of multiple strands of finely twisted oxygen-free copper wire with strong flexibility.
Insulation characteristics: Modified flexible environmental protection PVC material insulation, oil resistance, water resistance, corrosion resistance, high and low temperature resistance, high mechanical strength, excellent chemical stability and dielectric properties, good product performance, and safe use.
Applicable products: Suitable for installation in elevator equipment, as a cable for equipment connection, and can also be used for elevators and other lifting and similar lifting systems.
1. The maximum temperature of the conductor during normal use is 70°C. The product is usually not suitable for use below 0°C. When the temperature is lower than 0°C, it can be negotiated between the buyer and the manufacturer, and designed and manufactured according to the customer's technical requirements and use conditions.
2. TVVB series cables are intended to be used for elevators and elevators whose free suspension length does not exceed 80m and moving speed does not exceed about 4m/s. When the cable usage exceeds the above limit, it can be resolved through negotiation between the buyer and the manufacturer. Load-bearing components (such as steel wire ropes). The elevator cables with additional load-bearing parts are intended to be installed in elevators and elevators with a free suspension length greater than 80m and a moving speed not exceeding 10m/s.
3. The insulated cores of the cable are numbered and arranged in parallel. The cable structure is soft and easy to lay and install. The same specifications and sizes can be designed and improved according to the needs of customers.
4. The rated voltage of the elevator cable is 300/500V for the nominal cross-section of the core wire 1mm and below, and 450/750 V for the cross-section of the core wire above 1mm.