Elevator video monitoring cable has the characteristics of long service life, stable video transmission model and high definition.

Installation Notes:
1. The Elevator video monitoring cable should be kept at least 150MM away to avoid strong interference when the elevator is running, and the bending radius of the cable meets the standard requirements.
2. When the cable is installed and used, it should hang freely, fully back and twist, and there must be no knots or waves to avoid unstable signal transmission.
3. The suspension reinforcement core (steel wire rope) in the cable should be fixed after being stripped to bear the weight and tension of the cable itself. The tension of the two reinforcement cores should be consistent to avoid deformation and damage to the cable during movement.
4. When the elevator car compresses the buffer, the Elevator video monitoring cable must not be in contact with the bottom pit surface and the bottom frame of the car to avoid damage to the cable.
5. The cable joints must not have false welding, desoldering, etc., and a firmness test should be carried out (appropriate force should be placed on the connector and the cable, and the joints must not fall off, break, etc.).
6. When installing the Elevator video monitoring cable, the movable part of the cable should avoid the uncleaned residues in the elevator shaft (such as steel bars, cement protrusions, etc.), so as not to damage the cable due to hooking or abrasion during operation.