The advantage of SYV aluminum foil shielded and copper braided shielded coaxial cable is that it can support high-bandwidth communication on relatively long lines without repeaters. Let's take a look at its installation method.

SYV aluminum foil shielded and copper braided shielded coaxial cable are generally installed between equipment. A connector is provided at each user location to provide an interface for the user. The interface installation method is as follows:
(1) Thin cable: Cut the thin cable, install BNC heads on both ends, and then connect to both ends of the T-connector.
(2) Thick cable: Thick cable is generally installed with a Tap device similar to a splint. It uses the guide pin on the Tap to penetrate the insulation layer of the cable and directly connect to the conductor. SYV aluminum foil shielded and copper braided shielded coaxial cable are equipped with terminators at both ends to weaken the reflection of the signal. For networks with a transfer rate of 10Mbit/s.