The manufacturing process of Double steel wire category 6 network cable elevator cable is completely different from the production of most electromechanical products. The electromechanical products we see are generally assembled into parts first, and then assembled into a single product with multiple parts. Such products are often measured in pieces or units. The wire and cable are all based on length as the basic unit of measurement. All cables start from the processing of the conductor, and add insulation, shielding, wiring, dustproof and other steps to the outer layer of the conductor to make a complete finished product.

As the structure of the product becomes more complex, more and more layers need to be superimposed. Double steel wire category 6 network cable elevator The cable manufacturer tells you that due to the long-length continuous superposition combined production mode, the manufacturer affects the overall situation and control of the cable production process, and needs to affect the production process and equipment layout, production organization management, quality management and other three process. Every piece of equipment in the workshop that produces products is arranged in strict accordance with the technological process of product requirements, so that the semi-finished products of each stage flow in sequence.
At this time, due to the difference in production efficiency, it is often necessary to consider the balance of different production capacities. It may be necessary to configure some equipment to balance the production capacity of the entire production line. Therefore, product and output need to be considered when choosing a combination of equipment and site layout.
Secondly, the production organization and management must meet several conditions, namely meticulous, accurate, scientific and reasonable, strict and meticulous. As an operator, he must execute the order meticulously in accordance with the requirements of the entire process. As long as there is a small problem in any link, it will affect the smoothness of the entire process, and eventually lead to unqualified product quality. Double steel wire category 6 network cable elevator The cable manufacturer tells you that especially for multi-core cables, if the length of a unit suddenly becomes shorter, the length of a line becomes shorter or there is a quality problem, the length of the cable will eventually fail to meet the standard , resulting in scrap, the cost will greatly increase.
Finally, to carry out quality management. Double steel wire category 6 network cable elevator The cable manufacturer tells you that due to the production mode of long-length continuous superposition and combination, as long as there is a little problem in any link or moment in the production process, it will affect the final product quality, so in the cable production process Throughout the process, strict quality management is required.