The Elevator video monitoring cable contains reinforced steel wire and nylon rope and fiber. The outer sheath is made of super soft PVC material, which effectively increases the tensile strength and flexibility. It has the characteristics of long service life, stable video transmission model and high definition. The following takes you to understand some precautions when installing.

Elevator video monitoring cable installation precautions:
1. The Elevator video monitoring cable should be freely suspended and fully twisted before installation and use (to avoid cable knots and wave distortion);
2. The reinforcing core of the steel rope in the Elevator video monitoring cable should be fixed after stripping, and should bear the weight of the cable itself and the running tension;
3. The two steel rope reinforcement cores in the Elevator video monitoring cable should maintain a symmetrical and consistent tension after stripping, and the deviation between the tension and the average value should be less than 5%;
4. When the elevator car compresses the elevator buffer, the electric Elevator video monitoring cable must not contact the pit and the bottom frame of the car;
5. During installation, the cable video and power interface shall not be soldered or de-soldered and shall be firmly fixed.
The content of the installation precautions for Elevator video monitoring cable is introduced here, I hope it can help you.