Elevator video monitoring cable is used in building elevator video field, communication control system, video monitoring system.

The Elevator video monitoring cable manufacturer tells you that half of the elevators are used for extension. Most of the high-rise elevators can reach more than 100 meters. The dead weight of a 100-meter elevator is nearly 100 kilograms, so the elevator must have sufficient tensile strength. Now there are self-supporting flat composite elevator monitoring special elevators on the market. This elevator combines video coaxial elevators, power lines, data lines and steel strands to make a flat belt elevator (elevator accompanying elevator). ), so that the tension of the whole elevator is borne by the steel wire rope, the tensile strength is very good, and the signal elevator will not be broken due to gravity during elevator operation.
The Elevator video monitoring cable manufacturer tells you that when the elevator moves up and down with the elevator, there will be a section in the middle that will bend and deform under the action of gravity, resulting in changes in electrical parameters such as the impedance and distributed capacitance of the elevator. The Elevator video monitoring cable manufacturer tells you that when the elevator of poor quality is subjected to force and deformation, the parameters change greatly, which will cause impedance mismatch, increase video attenuation and produce signal reflection, which will lead to a decrease in the signal-to-noise ratio of the video signal, resulting in Video interference, so you should try to choose a video elevator with good shielding and thick wire diameter to prevent the "invasion" of interference signals.
The soft and tensile Elevator video monitoring cable is not only convenient for construction, but also can ensure that the elevator is not easy to be damaged by external forces during high-speed acceleration and frequent round-trips every day, resulting in shortened life and unusable use of the elevator dedicated network cable. The soft wire can effectively offset some destructive external forces.