Category 5e unshielded waterproof network cable The manufacturer tells you that when it comes to the signal crosstalk shielding of the network cable, we can divide the network cable into shielded twisted pair and unshielded twisted pair. The Category 5e unshielded waterproof network cable manufacturer tells you that the unshielded twisted pair is divided into 4 pairs and twisted together by 8 wires of different colors. The function of pair twisting is to minimize the influence of electromagnetic radiation and external electromagnetic interference.

Category 5e unshielded waterproof network cable manufacturers tell you that according to the different shielding methods, shielded twisted pair cables are divided into two categories, namely STP and FTP. STP refers to a shielded twisted pair with each line having its own shielding layer, while FTP is a shielded twisted pair with an overall shield. The shielded twisted pair has a higher transmission rate, which can reach 155Mbps within 100 meters, which is higher than the corresponding unshielded twisted pair.
Some people may ask, since shielded twisted pair cables are anti-jamming and transmit faster than unshielded twisted pairs, why don't people use shielded Category 5 twisted pairs? This is because the shielded twisted pair requires that the entire system be shielded devices, including cables, sockets, crystal plugs and distribution frames, and the building needs to have a good grounding system.
Category 5e unshielded waterproof network cable manufacturers tell you that the harsh environmental conditions of shielded twisted-pair cables are doomed to the "fragility" of this technology. Generally speaking, in actual construction, it is difficult to perfectly ground all, so that the shielding layer itself becomes the largest source of interference, resulting in performance that may even be inferior to unshielded twisted pair. Therefore, unless there are special needs, usually only unshielded twisted pairs are used in the integrated wiring system.
Category 5e unshielded waterproof network cable manufacturers tell you that unshielded twisted-pair cables use physical principles to reduce signal crosstalk, while also bringing cost reductions and the robustness of network cabling. Although shielded twisted pair is superior to unshielded twisted pair in principle, its technical fragility and high capital investment have become a weakness. When choosing between the two directly, you need to be cautious.
The Category 5e unshielded waterproof network cable manufacturer tells you that if you really need higher network quality and longer transmission distance, users can install a repeater between two twisted-pair cables to achieve a better cabling cost performance.