Elevator video monitoring cable adopts a special structure design with long service life, which greatly improves the operating efficiency of elevator manufacturers. Elevator video monitoring cable can provide overall electrical control in the case of a long suspension length, and bear mechanical stress at the same time. The elevator cable should adopt steel wire to carry the core, which can be used for long-distance suspension applications.

Due to the weight of the Elevator video monitoring cable itself and the tension it needs to bear, the structure of the cable must be specially designed when it is used in a large-length suspension. The high-strength aviation galvanized steel wire is used for load bearing, which prolongs the service life and performance.
Elevator video monitoring cable installation precautions:
1. The elevator cable should be hung freely and fully twisted before installation and use;
2. The cable should not be knotted or twisted by waves.
3. The suspension reinforcing core in the cable should be fixed after being stripped, and should bear the tensile force at the same time.
4. The suspension reinforcement core should maintain a symmetrical* tensile force, and the deviation of the tensile force from the average value should be less than 5%.
5. Elevator video monitoring cable shall not be in contact with the pit ground and the bottom frame of the car, and should avoid friction with other objects.
6. The Elevator video monitoring cable manufacturer tells you that the video power interface must not have virtual connections and virtual welding, and it should be fixed firmly.