The manufacturer of Double steel wire category 6 network cable elevator cable tells you that towline cables have been very popular in industrial production and machine manufacturing. However, in many workplaces, due to the influence of interference factors from the inside and outside of the cable, it is necessary to tow The chain cable adds a shielding layer to reduce the interference of external signals and improve the performance of the cable. How can the shielding layer be maximized? Double steel wire category 6 network cable elevator cable manufacturers analyze from three aspects.

1. There is enough shielding to meet the needs of use
The manufacturer of Double steel wire category 6 network cable elevator cable tells you that electromagnetic interference will reduce the signal transmission efficiency in a normal environment. Generally speaking, the use of metal foil-type shielded drag chain cables can provide adequate noise protection. However, in environments with severe noise, shielded cables with a combination of woven mesh and metal foil can be used.
2. Choose a suitable shield for a specific environment
The manufacturer of Double steel wire category 6 network cable elevator cable tells you that in the use process that needs to be bent repeatedly, the spirally wound shielded cable layer is usually used, and the use of bent cables is avoided as much as possible. The shielding effect is weakened or disappears directly.
3. Grounding requirements
The manufacturer of Double steel wire category 6 network cable elevator cable tells you that in order to meet the grounding requirements of the equipment connected to the drag chain cable, it is necessary to use a large area of ​​shielding layer as much as possible, and check whether the connection between the grounding point and the shielded cable is tight. Whether the noise can be effectively eliminated, the most important point depends on whether the low impedance of the cable ground path is good.
Of course, if you want to maximize the effect of the shielding layer, the most important thing is to start from the source. The production materials, production processes, and use occasions are the best. Double steel wire category 6 network cable elevator cable The manufacturer tells you that after selecting the cable, you must set an appropriate grounding method. During use, pay attention to the operation method. Do not drag the cable or other actions that can cause great damage to the cable. Double steel wire The category 6 network cable elevator cable manufacturer tells you that you should avoid the supermarket environment as much as possible. Pay attention to protection during transportation, reduce friction with the contact surface, extend the service life of the cable, and further stress the role of the shielding layer.