Category 5e unshielded waterproof network cable manufacturers tell you that in the fiercely competitive cable industry, some cables are based on transmission voltage and current and have low technical content, which makes the industry's entry barriers low. Category 5e unshielded waterproof network cable manufacturers tell you that most people only need to look at the square of the conductor cross section when choosing this type of cable. This is an extremely wrong view.

1.Category 5e unshielded waterproof network cable manufacturer tells you that we must first determine whether the conductor resistance is qualified. If the copper wire contains too much impurities, the cross-section square is enough, it will not be qualified, because the resistance is large, the cable itself is easy to heat and damage the insulation, which will cause electric shock. Accidents and fires.
2. It depends on the insulation material. When the insulation material is the protective barrier between the cable conductor and the outside world, it is a safety factor.
Category 5e unshielded waterproof network cable manufacturers tell you to see whether it is eccentric, the thickness of the insulation layer, and the quality of the insulation material. Qualified insulating materials have the characteristics of long service life and high voltage resistance. Category 5e unshielded waterproof network cable manufacturers tell you that inferior insulation materials often peel off, break, and have a short use time, which can easily cause short-circuit failures and accidents.
3.Category 5e unshielded waterproof network cable The manufacturer tells you that if there is armor, it depends on the thickness of the iron sheet and whether the outer layer of the iron sheet is galvanized or painted.
4. Category 5e unshielded waterproof network cable manufacturers tell you to look at the thickness, eccentricity and material of the outer sheath.