To understand the installation method of High flexible drag chain shielded cable, you must first understand what is High flexible drag chain shielded cable and what are the characteristics of High flexible drag chain shielded cable? Only then can we better understand the installation method of High flexible drag chain shielded cable.

About what is High flexible drag chain shielded cable? High flexible drag chain shielded cable is the occasion where the equipment unit needs to be moved back and forth. In order to prevent the cable from entanglement, abrasion, pull-off, hanging and disorganization, the cable is often placed in the cable drag chain to protect the cable, and the cable can also be moved with it. The drag chain can move back and forth. This kind of High flexible drag chain shielded cable that can move back and forth with the drag chain and is not easy to wear. It can also be called drag cable or tank chain cable.
High flexible drag chain shielded cable is mainly used in: industrial electronic systems, automatic generation lines, storage equipment, robots, fire fighting systems, cranes, CNC machine tools and metallurgical industries.
7 rules for installation of High flexible drag chain shielded cable:
1. High flexible drag chain shielded cable needs to move quickly during use, so its laying cannot be twisted or bent, and it cannot be used from cable reels or cable reels (because the cable reels and reels need to be charged separately, so our factory produces The drag chain cable is generally based on whether the customer needs a cable reel) to untie the cable at one end, but the reel or cable reel should be rotated first to unwind the cable, and the cable can be unrolled or suspended if necessary. The cable used for this occasion can only be obtained directly from the cable roll.
2. When installing, you must pay attention to the minimum bending radius of the provided cable. (Relevant information can be found in the corresponding cable model webpage, for example: the bending outer diameter of the cable in the CC101 cable model webpage is in the next line of the technical index)
3. The cables must be laid loosely side by side in the drag chain, arranged separately as much as possible, separated by spacers or penetrated into the separation cavity of the bracket space, the gap between the cables in the drag chain should be at least 10% of the cable diameter.
4. The cables in the drag chain must not touch or be trapped together to avoid entanglement.
5. Both points of the cable must be fixed, or at least at the moving end of the drag chain. Generally, the distance between the moving point of the cable and the end of the drag chain should be 20-30 times the diameter of the cable.
6. Please make sure that the High flexible drag chain shielded cable is completely moved within the bending radius, that is, it cannot be forced to move. In this way, the cables can be moved relative to each other or the guiding device. After a period of operation, it is best to check the position of the cable. This inspection must be performed after the push-pull movement.
7. If the drag chain breaks, the cable also needs to be replaced, because damage caused by excessive stretching cannot be avoided.